Crom® Head Gasket Set Volvo Penta KAD42 KAD43 TAMD41 3583787 876104 3583786
High-quality marine engine spare parts from Sweden.
CromMarine® premium-quality decarbonizing gasket set for Volvo Penta:
- AD41A, AD41B, AD41D, AD41L-A, AD41P-A
- AQAD41A, AQD41A
- D41A, D41B, D41D, D41L-A
- TAMD41A, TAMD41B, TAMD41D, TAMD41H-A, TAMD41L-A, TAMD41M-A, TAMD41P-A
- TMD41A, TMD41B, TMD41D, TMD41L-A
- KAD42A, KAD42B, KAD42P-A
- KAMD42A, KAMD42B, KAMD42P-A
- TAMD42B, TAMD42WJ-A
- KAD43P, KAD43P-A, KAMD43P, KAMD43P-A
This head gasket kit, also known as a decarbonizing gasket kit, includes the head gasket with reference 3583786, 3582433, 3580742, 858992, 876853. The cylinder head bolts with reference 838775 should be replaced when needed[1], and tightening should be performed in five stages, following the attached diagram.
Tightening torque settings:
- 30 Nm
- 60 Nm
- 100 Nm
- Angle-tighten the screws 90° in numerical order as follows: Mark up the position of the screw heads with a chalk mark on the screw and cylinder head. Do not use a punch or a scribe as they can confuse future operations. Mark a 14mm socket, locate the socket as illustrated on the second picture, with the socket marking 90°counter-clockwise from the chalk mark on the cylinder head. Carry out angle tightening by tightening until the socket mark and the cylinder head chalk-mark are opposite each other.
-
Angle-tighten the screws 90° in numerical order as above. Tightening is finished when all screws have been angle tightened to 90°. Retightening after use is not necessary.
Kindly check the second picture that provides the necessary instructions, directly quoted from the Volvo Penta workshop manual.
[1] The cylinder head bolts should be replaced when there are signs of elongation, or cannot be specified if it is already elongated, by checking the "waist" of the bolt.
This product replaces the following manufacturer's part nr:
- Volvo Penta: 3583787, 876104, 876530
- Orbitrade: ORB21104, 21104
- Recmar: REC3583787
- Crom order number: 121026
The references that are listed here are trademarks that apply to the respective trademark owners. The references are used only for a reference purpose. Our product is compatible with these reference numbers. Please note that our product is an aftermarket product (non-OEM), unless otherwise stated.
