EVINRUDE JOHNSON POWERHEAD BASE GASKET 85 90 100 110 115 140HP 77-95 342513
Powerhead Base Gasket for Johnson Evinrude
High-quality marine engine spare parts.
Reference to Johnson / Evinrude : 0321727 321727 0342513 342513
Applications:
85HP 1977 - 1980
85HP 1985
85HP 1991 - 1995
90HP 1981 - 1995
100HP 1979 - 1980
100HP 1984 - 1995
115HP 1977 - 1985
115HP 1990 - 1995
140HP 1977 - 1984
A gasket is a mechanical seal which fills the space between two or more mating surfaces, generally to prevent leakage from or into the joined objects while under compression.
Gaskets are normally made from a flat material, a sheet such as paper, rubber, silicone, metal, cork, felt, neoprene, nitrile rubber, fiberglass, polytetrafluoroethylene (otherwise known as PTFE or Teflon) or a plastic polymer (such as polychlorotrifluoroethylene).
One of the more desirable properties of an effective gasket in industrial applications for compressed fiber gasket material is the ability to withstand high compressive loads. Most industrial gasket applications involve bolts exerting compression well into the 14 MPa (2000 psi) range or higher. Generally speaking, there are several truisms that allow for better gasket performance. One of the more tried and tested is: "The more compressive load exerted on the gasket, the longer it will last".
There are several ways to measure a gasket material's ability to withstand compressive loading. The "hot compression test" is probably the most accepted of these tests. Most manufacturers of gasket materials will provide or publish the results of these tests.
High-quality marine engine spare parts.
Reference to Johnson / Evinrude : 0321727 321727 0342513 342513
Applications:
85HP 1977 - 1980
85HP 1985
85HP 1991 - 1995
90HP 1981 - 1995
100HP 1979 - 1980
100HP 1984 - 1995
115HP 1977 - 1985
115HP 1990 - 1995
140HP 1977 - 1984
A gasket is a mechanical seal which fills the space between two or more mating surfaces, generally to prevent leakage from or into the joined objects while under compression.
Gaskets are normally made from a flat material, a sheet such as paper, rubber, silicone, metal, cork, felt, neoprene, nitrile rubber, fiberglass, polytetrafluoroethylene (otherwise known as PTFE or Teflon) or a plastic polymer (such as polychlorotrifluoroethylene).
One of the more desirable properties of an effective gasket in industrial applications for compressed fiber gasket material is the ability to withstand high compressive loads. Most industrial gasket applications involve bolts exerting compression well into the 14 MPa (2000 psi) range or higher. Generally speaking, there are several truisms that allow for better gasket performance. One of the more tried and tested is: "The more compressive load exerted on the gasket, the longer it will last".
There are several ways to measure a gasket material's ability to withstand compressive loading. The "hot compression test" is probably the most accepted of these tests. Most manufacturers of gasket materials will provide or publish the results of these tests.
